Imer Combi 3000,tile saws,stone saws,brick saws,block saws,slab saws,accurate saws,portable saws,granite saws,marble saws,masonry saws,installer saws,general contractor saws, electric tile saws,gas powered saws,chip free tile saws,stainless steel saws,rail saw,bridge saws

ph. 1-800-593-6095

IMER
HOME \| TILE & STONE SAWS \| BRICK & BLOCK SAWS \| MULTIMIXERS \| VERTICAL SHAFT MIXERS \| HORIZONTAL SHAFT MIXERS \| PUMPING & SPRAYING \| BLADES

COMBI 3000 - 10' Automated Slab Saw

Power
The 4 HP motor, combined with the serpentine drive belt reduction system delivers plenty of cutting power - standard granite slabs are cut in 4 to 5 minutes. The 4 HP motor runs on standard 220V 20 amp single phase electrical power. The motor has a belt reduction system that is fully enclosed and self tensioning. This system makes the blade spin at 2,150 rpm, the optimum speed for cutting stone with a 14" blade. Comparable direct drive motors spin much faster and do not develop as much cutting torque and power.

Click on the image to expand

BLADE NOT INCLUDED

Accuracy
When cutting full-size slabs the protractor is just not enough to accurately position the stone. The Combi 3000 has an additional fence system that runs the length of the saw.
This fence is fully adjustable and locks in place quickly and accurately.

The Water Tub
The water tub is easy to access and clean after a day of fabrication. Just roll it out from under the saw and empty.

Computer Controlled
A computer for automated current control ensures that the speed of cut and motor amperage draw are always at optimal levels. The gear drive advancement system is the most reliable made, fast, accurate, chip free cuts are automatic, pass after pass.

Reliability
The travel bar is built like an actual suspension bridge, with pre-tensioned bars anchored within it. This provides great reliability and accuracy, cut within a 1/32" over 10 feet.

Toughness
The Combi 3000 is built extremely well. Use the forklift hoist slots to move the 3000 around the shop, or load it up and take it to the jobsite.

User Friendly
The controls for a fully automated saw have never been more user friendly. Operating the Combi 3000 is not rocket science - new operators can be trained and up to cutting speed in an hour or two.

Fully Automated
The Combi 3000 has a computer on board which senses if the stone being cut becomes denser in certain spots. The computer will automatically ensure that additional amperage is sent to the motor, preventing stalling or pinching.

Versatility
The saw head also has the ability to chop up and down, plunge cuts up to 4 3/4" are possible.

Handling System
Two roller tables are included with every saw. This makes handling the slabs much easier.

Cutting 45°
Tilting to 45° degrees is easy, simply feather the hydraulic control lever and the saw gently rotates over to 45 degrees. To return the saw to 90 degrees, pump the lever 4 to 5 times. Simple, safe and accurate.

Click on any image to expand

COMBI 3000 10' Quick Specs
Blade diameter	14"
Blade shaft diameter	1"
Motor speed	2,850 rpm
Blade speed	1,850 rpm
Maximum cutting length	10"
Maximum cutting depth 90/45 degrees	4-3/4" / 2-1/3"
Cutting table dimensions	10' x 2.5'
Current required	220V, single phase, 20 amp
Water pump flow	4 g.p.m.
Water tub capacity	25 gals.
Noise level	78 db(A)
Operating Dimensions (boxed)
Length	13' 5"
Width	43"
Height	5' 8"

NO UPS - SHIPS BY COMMON CARRIER ONLY

Join our mailing list to keep informed of new products and sales!
Enter your email address below, then click the 'Join Now' button:

Part Number	Description	List Price	Your Price	Quantity
1188764	COMBI 3000 - 10' Automated Slab Saw (includes automated head travel, two roller tables, laser guide and granite blade)	~~$18973.95~~	$15598.95